Sanyo Xacti VPC-HD1 - Page 176

169 English
COMMONLY ASKED QUESTIONS
Misc.
Why can’t the
camera be
operated?
A temporary
internal circuitry
problem may be
the cause.
Remove the AC
adaptor and the
battery pack from
the camera, wait a
few minutes, then
reinstall the battery
pack and try again.
Can I use my
camera abroad?
— When the camera is
connected to a TV,
you can switch the
camera’s video
output to NTSC or
PAL. If you have
questions about
using the AC
adaptor and power
cord abroad, please
consult with a dealer
near you for advice.
Why does the
“SYSTEM
ERROR”
message appear?
A problem has
occurred within
the camera or
card.
Check the following
items:
1 Remove the
card and then
install it again.
2 Remove the bat-
tery pack and
then install it
again.
3 Install a different
card.
If “SYSTEM
ERROR” still
appears after per-
forming the above
steps, then take the
camera to the dealer
for service.
Question Answer Action