EasyManua.ls Logo

Sanyo Xacti VPC-HD1 - Page 189

Sanyo Xacti VPC-HD1
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 182
Shutter speed Still image shooting mode: 1/2 to 1/2,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/2,000 sec.)
Sequential shots shooting mode: 1/15 to 1/2,000
second (no flash)
Video clip shooting mode: 1/30 to 1/10,000 sec.
Sensitivity Still image shooting mode:
Auto (equivalent to ISO 50 to 200)/equivalent to
ISO 50, ISO 100, ISO 200, and ISO 400
(switchable from Shooting Setting Screen)
Video clip shooting mode:
Auto (equivalent to ISO 200 to 800)/equivalent to
ISO 200, ISO 400, ISO 800 and ISO 1600
(switchable from Shooting Setting Screen)
* Maximum ISO sensitivity up to 1,600
equivalent when Scene Select function is set to
Q
Image stabilizer Electronic
Monitor 2.2-inch organic EL
Approx. 210,000 pixels
(Frame coverage: Approx. 100%)
Flash working
range
GN = 6.4
Approx. 35 cm (13.78 in.) to 2.5 m (8.20 ft.)
(Wide)
Approx. 1 m (3.28 ft.) to 2.5 m (8.20 ft.) (Tele)
Flash modes Auto-flash, forced flash, flash off, red-eye reduction
Focus TTL-type AF (still image shooting mode: 5-point
range finder/spot focus; video clip recording mode:
continuous area focus), manual focus (22 steps)
Self-timer Approx. 2-second delay, 10-second delay
Ambient
environment
Temperature 0 to 40°C (32 to 104°F) (operation),
–20 to 60°C (–4 to 140°F) (storage)
Humidity 30 to 90% (operating, no
condensation)
10 to 90% (storage, no
condensation)

Table of Contents

Related product manuals