EasyManua.ls Logo

Sanyo Xacti VPC-HD2 - Page 213

Sanyo Xacti VPC-HD2
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
199 English
SPECIFICATIONS
Shutter speed Still image shooting mode: 1/2 to 1/2,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/2,000 sec.)
Sequential shots mode: 1/15 to 1/2,000 sec. (no
flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max.: when scene select function is set
to lamp mode Q)
Sensitivity Still image shooting mode (Standard output
sensitivity*):
Auto (ISO 50 to 400)/ISO 50, ISO 100, ISO 200,
ISO 400, ISO 800, and ISO 1600 (switchable from
Shooting Setting Screen)
* Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
Video clip recording mode:
Auto (equivalent to ISO 200 to 1600)/equivalent to
ISO 200, ISO 400, ISO 800, ISO 1600, and ISO
3200 (switchable from Shooting Setting Screen)
* Maximum ISO sensitivity up to 3200 equivalent
when Scene Select function is set to Q
Minimum subject
illumination
18 lux (HD mode/normal mode, 30 fps, 1/30 sec in
AUTO mode)
7 lux (HD mode/normal mode, 30 fps; 1/15 sec in the
HIGH SENSITIVITY or lamp mode)
Image stabilizer Electronic (video clip recording mode only)
Monitor Amorphous silicon TFT color liquid crystal
(transmissive)
150,000 pixels (frame coverage: approx. 100%)
Flash working
range
GN = 6.4
Approx. 35 cm (13.78 in.) to 2.5 m (8.20 ft.)
(Wide)
Approx. 1 m (3.28 ft.) to 2.5 m (8.20 ft.) (Tele)
Flash modes Auto-flash, forced flash, flash off, red-eye reduction

Table of Contents

Related product manuals