Sanyo XM150 - Page 20

-20-
Mechanical Disassembly
2. Fan (FN905) AND Main board removal
1. Remove 1 screw-A (M3x8) and 3 screws-B (T3x8) to take the Fan (FN905)
upward off.
2. Remove 10 sccrews-C(M3x8) to take the Main board shield top off.
3. Remove 2 screws-D(M3x8) and 8 hex-screws E and 1 screws-F(M3x8)
and then remove the main board.
3. A/V board and removal
1. Remove 1 screw-A (M4x8) and pull the A/V board assy upward.
2. Remove 2 screws-B (T3x8) to take the Main board shield bottom.
E
F
D
D
C
C
C
C
C
C
C
C
Main board
Main board
shield top
B
B
A
Fan (FN905)
Main board shield bottom
A/V board
AV panel
C
C
A
B
B
B