Sanyo XM150 - 1 Optical Axis Adjustment

-36-
Optical Adjustment
1-1. Condenser lens adjustment-1
1
Loosen 2 screws A and 1 screws C.
2 Move the condenser lens to display the color shading on the top/bottom
and left/right of the screen.
1) Insert a slot driver into the slot B and turn it to move the image horizon-
tally as shown in Fig.1-1,
2) Insert a slot driver into the slot D and turn it to move the image vertically
as shown in Fig.1-2,
1. Optical axis adjustment
Cyan/Magenta Magenta/Cyan Magenta/Cyan
Cyan/Magenta
Cyan/Magenta
Magenta/Cyan
(Target screen image)
Fig.1-1 Fig.1-2
White
Select the internal test pattern signal “All white” from the projector’s menu
“Menu -> Setting -> Test pattern”.
C
D
A
B