SANYU SY5000 Series - F0 Group: VFD Type and Control Mode

37
F 0.04
VFD type
0：G type（constant torque load
type）
1：P type（fan, water pump load
type）
Note 1：set as P type, and the
VFD parameters will refresh
automatically, without modifying
any parameter the VFD can be
used as inverter of higher grade
for application of fan and water
pump.
Note 2：can not be initialized,
please modify it manually.
1
0
×
F 0.05
Control mode
0 ： common V/F control
(manually torque boost)
1 ： advanced V/F control
(automatically torque boost)
2 ： open loop current vector
control (SVC)
3 ： closed loop currnt vector
control (rserved)
4：separatd type V/F control
Note 1：choose control method 3
(closed loop current vector
control),input terminal X6 can
only be used for ordinary
terminal, not for high-speed
1
Depending
on model
×