DXD7025SVC
Quick Start
Guide
Front
A Saorview Connect box
B Saorview remote control
C Baeries for the remote control
D Power adapter
E HDMI cable
F Ethernet cable
STEP ONE – CHECK YOU HAVE EVERYTHING
Quick Start Guide
A
B
C
E
F
D
Make sure the power is turned o before you begin.
01 Connect the cable from your TV aerial into
the port – RF IN.
02 If you have a satellite dish and want to use
it to access additional free channels, screw
its cable into the port – SAT IN 1.
03 Connect the box to your TV using the
HDMI cable.
04 Next, you can connect the box to your
broadband router with the Ethernet cable, or
you can connect to Wi-Fi later once the box is
switched on.
05 Connect the power adapter into the Power port,
plug it in and switch it on at the socket.
STEP TWO – CONNECT YOUR BOX
04 Ethernet 01 RF IN
05 Power
02 SAT IN 1
03 HDMI
Fold
Fold
Fold
Fold
To Next Page
Need help?
General
