From 08/2015 IH
Page 5/10
Instruction Manual Induction Cooking Plate Model FINJA
5. Display / Control Panel
FUNCTION buttons
Selection of:
1. Operation with Power Settings
(Warning light “HEATING”)
2. Operation with Temperature Setting
(Warning light “TEMP”)
DISPLAY
Displays the set values:
Temperature, power level or timer time.
In case of faults: Error Message.
ARROW BUTTONS
Activation of the timer for:
1. Operation with Power Settings + Timer Application
(Warning light “HEATING“&“TIMER”)
or
2. Operation with Temperature Setting + Timer Application
(Warning light “TEMP“&“TIMER”)
and setting the time.
When using the timer, the time is set in 5-minute intervals or changed again during cooking.
Time settings from 0 to 180 minutes. For example, 0, 5, 10, 15, 20, 25, ..., 175 or 180 minutes.
CONTROL DIAL "OFF - MAX"
Switching on and off of the device,
Setting the desired power level (1 to 15) or
Set the desired temperature (from 60 to 240 °C)
Temperature adjustment in steps of 20. For example, 60, 80, 100, ..., 200, 220 or 240 °C.
Power settings. For example, level 1 = 500 watts, 2, 3, 4, 5, 6, 7, 8, .... Level 15 = 3500 watts.
The Warning light to the right of the dial
shows the induction cooker is in the working mode.
6. Start-up
• Clean the equipment surfaces before first use with a soft, damp cloth and commercially
available detergent.
Ensure that the cable and the plug do not get wet. Do not place in the water!
Remove detergent residue, then wipe dry.
To Next Page
Loading...