Initial Startup
Operating Instructions Arium
®
Comfort I, Comfort II 27
Pre-treatment cartridge installation (pre-filter)
Installation of the prefilter is likewise described in the installation
instructions accompanying the prefilter.
t Remove the new prefilter from the packaging and write the date of
installation under “Date of installation” on the label.
t Open the device door.
t Connect the gray-labeled upper connection of the prefilter (1).
t Connect the red-labeled upper connection of the prefilter (2).
t Press the prefilter into the holder (3).
1
2
3
Arium
®
Comfort I
3
Arium
®
Comfort II