Sartorius BioPAT Xgas - Arrangement on the Bioreactor and Assembly

24 Operating Instructions BioPAT
®
Xgas
Installation
4.5 Arrangement on the Bioreactor and Assembly
Fitting the BioPAT
®
Xgas to a Biostat
®
C Plus:
Pos. Description
A BioPAT
®
Xgas Sensor & flowpath module
B Support
 Valves for switching the exhaust feed
D Pneumatic pressure control valve
E Pipe to BioPAT
®
Xgas sensor
F Pipe between exhaust feed and pressure control valve
 Outlets into the ambient air or for connection to the laboratory vent,
if necessary
A
F
E
D
B
C1
G1
C2
G2