Version 09/2015, Rev. 1.3 of 02/03/2017
Translation of the original operating manual, WZG6001-e150401
Pos: 37 /100 Sigma/10 0 BA Zentrifugen Sigma (Sta ndardmodule)/03 0 Sicherheit/030- 0030 Vera ntwortung des Betreiber s @ 26\mod_1405319015 364_68.docx @ 191961 @ 2 @ 1
3.3 Responsibility of the operator
The operator is responsible for authorising only qualified personnel to work on the
centrifuge (see chapter 3.4 - "Operating personnel").
The areas of responsibility of the personnel concerning the operation, maintenance,
and care of the unit must be clearly defined.
The safety-conscious work of the personnel in compliance with the operating
manual and the relevant EC and national health and safety regulations as well as
with the accident prevention regulations must be checked at regular intervals (e.g.
every month).
Under the international rules for health and safety at work, the operator is obliged
to:
take measures in order to prevent all danger to life or health during work.
ensure that centrifuges are operated properly and entirely as intended (see
chapter 1.2 - "Intended use").
take protective measures against fire and explosion when working with
hazardous substances.
take measures for the safe opening of centrifuges.
Pos: 38 /010 Unive rsalmodule/ Lee rzeile @ 0 \mod_1202116244 500_0.do cx @ 114 @ @ 1
Pos: 39 /100 Sigma/10 0 BA Zentrifugen Sigma (Sta ndardmodule)/03 0 Sicherheit/030- 0040 Bedienpe rsonal @ 26 \mod_14053190176 34_68.do cx @ 191989 @ 2 @ 1
3.4 Operating personnel
Persons operating the unit must
be familiar with the fundamental regulations concerning workplace safety and
accident prevention
have read and understood this operating manual (and in particular the safety
sections and warning notes) and confirmed this with their signature.
Pos: 40 /010 Unive rsalmodule/ Lee rzeile @ 0 \mod_1202116244 500_0.do cx @ 114 @ @ 1
Pos: 41 /100 Sigma/10 0 BA Zentrifugen Sigma (Sta ndardmodule)/03 0 Sicherheit/030- 0050 Informel le Sicherhei tshinweise @ 26 \mod_140531901996 6_68.do cx @ 192017 @ 2 @ 1
3.5 Informal safety instructions
This operating manual is a part of the product.
The operating manual must be kept at the location of use of the centrifuge.
Ensure that it is accessible at all times.
The operating manual must be handed over to any subsequent owner or
operator of the centrifuge.
Any changes made must be added to the operating manual.
In addition to the operating manual, the general and local rules and regulations
concerning the prevention of accidents and the protection of the environment
must also be supplied.
Safety and danger indications on the centrifuge must be kept readable at all
times. If necessary, they must be replaced.
Pos: 42 /010 Unive rsalmodule/Seite nwechsel @ 0\mo d_120211624 4312_0.docx @ 105 @ @ 1