Sartorius H2O-MA-UV-T - Messages in Dispensing Mode

18 Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential
Operating Design
4.3 Messages in Dispensing Mode
If several messages are active in dispensing mode, the message list can be called up
(see Chapter “4.4 Message List,” page 19). The message list only appears if several
messages are active and at least one water conductivity or temperature message
cannot be displayed. If only one message is active, the message is opened directly
instead of the message list.
Dispensing is not possible when there is an error message. The three buttons for
dispensing can be used, but when you try dispensing, the error message reappears.
Fig. 4-3:
8
3
1
2
0.25
8
0.055 μS/cm c
30.1 °C
5l
3l
1l
Messages
1
Message display in dispensing mode (example)
No. Symbol Name Description
1
Messages
1
Messages
2
Messages
3
Message list
Messages
1
Indicates that error messages
are stored and opens the
message list.
Messages
2
Indicates that warning messages
are stored and opens the
message list.
Messages
3
Indicates that status messages
are stored and opens the
message list.
2
8
8
Conductivity or
temperature
message
Displays an error or warning with respect to the
water conductivity or the water temperature.
3
8
8
Message
pertaining to
the filling level
of the bag
8
Indicates that the bag is empty. Water
dispensing is not possible.
8
Indicates that only a small amount of
water can still be dispensed
(only arium
®
mini plus and arium
®
mini).