30 Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential
Startup
t Connect the power supply to the connection labeled “Power” on the rear
of the device.
t Fix the power supply to the housing using the supplied Velcro strip.
To do this, pull the Velcro strip through the eyelet as shown in the figure.
t Lay the protruding power cord so that it cannot be damaged or obstruct
subsequent connection of hoses.
t Connect the device to the AC power using the power cord.
y The device starts up and performs a system scan.
arium mini
Booting device...
To Next Page
Loading...