Sartorius H2O-MA-UV-T - Starting Startup Mode; Setting the Date and Time

32 Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential
Startup
6.2.3 Starting Startup Mode
The demo mode of the device can be started by pressing the [DEMO] button. Access
to demo mode is password-protected and only accessible to Sartorius employees.
Procedure
t To start startup mode: Tap the [START] button.
6.2.4 Setting the Date and Time
Requirements
The “Date and Time” dialog box appears.
Procedure
t Tap the [t] button.
t Select the desired date format:
− DD.MM.YYYY
− MM/DD/YYYY
− YYYY-MM-DD (ISO)
t Confirm the selection with the [l] button.
t Enter the date.
t Confirm the selection with the [l] button.
t Select the desired time format:
− 24h
− 12h (AM/PM)
t Confirm the selection with the [l] button.
1
Startup
Welcome. You will be guided step-by-step
through the startup procedure of your new
arium mini.
DEMO
w
1
;
t
Date and time
First, set up the date and time.
>
Date format
DD.MM.YYYY
MM/DD/YYYY
YYYY-MM-DD (ISO)
>
p
u
0
123
456
789
Date
01.07.2015
>
Time format
24h
12h (AM/PM)