Sartorius H2O-MA-UV-T - Setting Displayed Values

Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential 33
Startup
t Enter the time.
t Confirm the selection with the [l] button.
6.2.5 Setting Displayed Values
Requirements
The “Displayed values” dialog box appears.
Procedure
t Tap the [t] button.
t Set the desired format for the water quality:
− μS/cm c (compensated to 25°C)
− MOcm c (compensated to 25°C)
t Set the desired format for the temperature:
− °C
− °F
− Off (no temperature display)
t Confirm the selection with the [l] button.
y ”Remove cover” appears on the screen. Depending on the device type,
a pretreatment cartridge or a cleaning cartridge must be inserted (see
Chapter “6.3 Inserting Pretreatment Cartridge (only arium® mini plus),”
page 34, Chapter “6.4 Inserting Ultrapure Water Cartridge,” page 35).
>
p
u
0
123
456
789
Time
10:11 AM
1
;
t
Displayed values
Select the measurement values which
you would like to display during
water
dispensing
.
>
Displayed values
μS/cm c
MΩcm c
Temperature [°C]Water quality
°C
°F
Off
1
Remove cover
Please remove the front cover.
OK