EasyManua.ls Logo

Sartorius H2O-MA-UV-T - Connecting Tubing

Sartorius H2O-MA-UV-T
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential 37
Startup
t NOTICE Danger of damage to the device from improper handling! The bag may
be damaged if forced into the guide rails: The bag can be damaged. Use only
slight pressure when inserting the bag into the guide rail.
t Using the handle, slide the bag into the guide rail in the upper portion of the
device housing. The bag is secure when the reinforcing piece on the carrying
handle is completely engaged in the guide rail.
t Using the quick connector, fasten the upper hose of the bag to the device’s
upper connection.
y The quick connector locks into place with an audible click.
t Fasten the two lower bag hoses to the lower device connections using the
quick connectors.
y The quick connectors lock into place with an audible click.
t Reinsert the tray. Make sure not to damage the bag.
t Reattach the left side cover of the device.
t Confirm the insertion of the bag with the [OK] button.
y The dialog box “Connect tubing” appears. Tubing must be connected
(see Chapter 6.6, page 38).
1
Connect tubing
Connect tubing for feed water (Inlet), drain
water (Drain) and tank outlet (Bag outlet)
on the rear of the device as described in
the manual.
OK

Table of Contents