Sartorius H2O-MA-UV-T - Confirming Dispensing Cancelation

Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential 47
Operation
t Enter the desired dispensing volume in liters. Observe the guidelines for
volume input.
y The volume entered appears.
t Tap the [START] button.
y Dispensing begins:
− The volume dispensed thus far is displayed in increments of 0.05 liters (50 ml).
− The ultrapure water flows into the vessel at a maximum throughput rate of
about 1.0 l/min.
− If an arium
®
mini plus or arium
®
mini is used: The filling level of the bag will be
updated on the display during dispensing.
− Dispensing will stop automatically when the selected dispensing volume
has been reached.
t To cancel dispensing before it is finished: Tap the [x] button.
Using Favorites
The last selected dispensing volume is automatically stored and displayed on
the Favorites button on the dispensing screen.
Procedure
t To start another dispensing process with the previously selected dispensing
volume: Tap the Favorites button.
y Dispensing begins.
t When dispensing is finished: Attach the protective cap to the final filter bell
assembly.
7.2.4 Confirming Dispensing Cancelation
Only as much water can be dispensed as is present in the bag.
arium
®
mini plus
If the bag contains an insufficient amount of water, dispensing stops and the dialog
box “Dispense canceled” appears.
Procedure
t Confirm the message with the [l] button.
t Wait until the bag has filled to a sufficient level.
t Restart dispensing.
p
u
0
123
456
789
.
Volume
1.00 l
w
m
0.055 μS/cm c
21.3 °C
STOP
5l
3l
1l
0.30 / 1.00
$&
1.00
0.055 μS/cm c
21.3 °C
5l
3l
1l
1
l
Dispense canceled
Wait until enough water is available in
the bag.