Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential 49
Operation
7.4 Manually Filling the Bag (only arium
®
mini)
If the bag filling level of the device has been reached or is no longer sufficient for
the desired dispensing volume, the bag can be filled manually. Manual filling of the
bag can be carried out in several ways.
7.4.1 Starting Manual Filling Using the Wizard
Procedure
t If the filling level is too low for the dispensing volume entered during
volume-controlled dispensing:
y The dialog box “Fill bag?” appears.
t Tap the [YES] button.
y The bag empties during manual dispensing.
y The message “Tank level too low” appears.
t Confirm the message with the [l] button.
y [FILL BAG] appears on the dispensing screen.
t Tap the [START] button.
t If the bag is empty before dispensing, e.g. because ultrapure water was
dispensed manually:
y The message [FILL BAG] appears on the dispensing screen.
t Tap the [START] button.
7.4.2 Starting Manual Filling in the Menu
If the bag contains water: Bag filling must be initiated using the menu. To do this:
Procedure
t Tap the
[Fill bag] symbol.
1
Fill bag?
The bag contains 3 l of water. Would you
like to ll it now?
NO YES
1
Tank level too low
The tank level is too low for dispensing
water.
8
0.055 μS/cm c
21.3 °C
START
5l
3l
1l
FILL BAG
j
i
Dispense Care
Fill bag