Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential 55
Cleaning and Maintenance
8.4 Displaying Reminders
Reminders to replace certain consumables are automatically displayed as warning
messages (see Chapter 9.2, page 68). Pending consumables replacements can be
viewed at a glance.
All reminders are automatically updated after the consumable has been replaced.
Procedure
t Tap the menu item [
Reminder] in the “Care” menu.
y The date for the next required replacement is displayed for the bag, the
pretreatment and ultrapure water cartridge, the UV lamp and the final filter.
8.5 Replacing Consumables
8.5.1 Selecting Consumables for Replacement
Consumable replacement must be set using the display. To do this, you must define
which consumables are to be replaced in the menu “Replace consumable”.
1 or more consumables can be selected.
If several consumables are selected: The wizard guides you through the replacement
of the individual consumables. The individual steps are shown on the display.
Procedure
t Tap the menu item [
Change material] in the “Care” menu.
y The “Change material” menu appears. The consumables that can be changed
are indicated, e.g. bag, pretreatment cartridge.
t Select the desired consumables. To do this, tap on the menu items for the
consumables, e.g. [Bag], [Pretreatment cartridge] and [Ultrapure water cartridge].
y The selected menu items are highlighted and marked with a checkmark.
t Confirm the selection of consumables with the [l] button.
y If several consumables are selected: The wizard guides you through all
consumable replacement and work steps.
Reminder
Bag: 01.07.2016
Pretreatment cartridge: 01.07.2016
Ultrapure water cartridge: 01.07.2016
UV lamp: 01.02.2017
Sterile nal lter: 01.04.2016
Change material
Bag
Pretreatment cartridge
Ultrapure water cartridge
UV lamp
Sterile lter
Change material
Bag
Pretreatment cartridge
Ultrapure water cartridge
UV lamp
Sterile lter
>
>
>
To Next Page
Loading...