Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential 57
Cleaning and Maintenance
Inserting New Bag
Procedure
t NOTICE Danger of damage to the device from improper handling! The bag may
be damaged if forced into the guide rails: The bag can be damaged. Use only
slight pressure when inserting the bag into the guide rail.
t Using the handle, slide the bag into the guide rail in the upper portion of the
device housing. The bag is secure when the reinforcing piece on the carrying
handle is completely engaged in the guide rail.
t Using the quick connector, fasten the upper hose of the bag to the device’s
upper connection.
y The quick connector locks into place with an audible click.
t Fasten the two lower bag hoses to the lower device connections using the
quick connectors.
y The quick connectors lock into place with an audible click.
t Reinsert the tray. Make sure not to damage the bag.
t Reattach the left side cover of the device.
t Confirm the insertion of the bag with the [
OK] button.
y The dialog box “Close tank outlet” appears.
t Close the ball cock of the tank outlet tubing.
t Confirm that the tank outlet has been closed with the [OK] button.
y If an arium
®
mini plus is used: The device automatically begins filling the bag.
t If an arium
®
mini is used: The filling process must be started.
y The dialog box “Fill bag?” appears on the device display.
t To fill the bag: Tap the [YES] button. Manually fill the bag (see Chapter 7.2.5,
page 48).
t To fill the bag at a later point in time: Tap the [NO] button.
1
Close bag outlet
Close the tank outlet (Bag Outlet) at the
rear of the device.
OK
To Next Page
Loading...