Sartorius H2O-MA-UV-T - Replacing Ultrapure Water Cartridge

Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential 59
Cleaning and Maintenance
8.5.4 Replacing Ultrapure Water Cartridge
To replace the ultrapure water cartridge, the final filter must be removed and the
device depressurized. The ultrapure water cartridge is marked with an “L”.
Requirements
− In the “Change consumable” menu, the menu item [Ultrapure water cartridge]
is activated.
− The dialog box “Remove filter” appears.
Procedure
t Remove the final filter (removal, see Chapter “8.5.6 Changing Final Filter,”
page 62).
y The dialog box “Prepare depress. / Start depressurization” appears.
t Start depressurization (see Chapter 8.7, page 63).
y When depressurization is complete, the dialog box “Remove cover” appears.
t Remove the front cover.
t Confirm removal of the cover with the [OK] button.
y The dialog box “Change cartridge” appears. The ultrapure water cartridge (L)
can be changed.
t Press the two protruding terminals of the ultrapure water cartridge together
and pull the ultrapure water cartridge forward and out.
t Confirm removal of the ultrapure water cartridge with the [OK] button.
t Insert a new ultrapure water cartridge in the device (see Chapter 6.4, page 35).
t Rinse the ultrapure water cartridge (see Chapter 6.8, page 41).
y Once the ultrapure water cartridge has been rinsed:
The dialog box “Connect filter” appears.
t Connect the final filter (see Chapter 6.9, page 44).
y Replacing the ultrapure water cartridge is complete.
1
Remove cover
Please remove the front cover.
OK
1
Changing Cartridge
Change the ultrapure water cartridge (L)
as described in the manual.
OK