Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential 65
Cleaning and Maintenance
t arium
®
mini plus product water quality:
y If the bag no longer contains a sufficient amount of water or empties during
the rinsing process, the bag is filled automatically.
t When filling is complete, the dialog box “Preparing to rinse” appears: Start
the rinsing process again.
t Only arium
®
mini:
y If the bag in the no longer contains a sufficient amount of water or empties
during the rinsing process, the dialog box “Fill bag” appears.
t The dialog box “Fill bag” appears: Manually fill the bag (see Chapter 7.2.5,
page 48).
y During the rinse cycle, the remaining rinse time is displayed in minutes.
t To interrupt the rinse cycle:
t Tap the [x] button.
y The dialog box “Start rinsing” appears again.
t To resume the rinse cycle after an interruption: Tap the [START] button.
y When rinsing is complete, the dialog box “Connect filter” appears.
t Connect the final filter (see Chapter 6.9, page 44).
t Confirm that the final filter has been connected with the [OK] button.
y The display changes to the dispensing screen.
Fill bag
14%
1
Fill bag
Make sure there is sufcient water to
ll the bag. Tap “START” to begin lling
the bag.
w
Rinsing
00:30 minutes
1
Connect lter
Connect the nal lter as described in the
manual.
OK
To Next Page
Loading...