8 Operating Instructions arium
®
mini plus | arium
®
mini | arium
®
mini essential
Safety Notes
Target group Knowledge / responsibilities
Operating engineer /
laboratory manager
The operating engineer / laboratory manager makes
decisions about the use and parameterization of the device.
The operating engineer / laboratory manager is trained in
the operation of the device. The training is performed by
Sartorius Service or the operator.
Operator The operator of the device is responsible for compliance
with safety requirements and workplace safety regulations.
The operator must ensure that all persons who work with
the device have access to the relevant information and
have been instructed in work with the device.
2.3 Significance of These Instructions
Failure to follow these instructions can have serious consequences, e.g. exposure of
individuals to electrical, mechanical or chemical hazards.
t Before working with the device: Read the instructions carefully and completely.
t If the instructions are lost: Request a replacement or download the latest
instructions from the Sartorius website (www.sartorius.com).
t The information contained in these instructions must be made available to all
individuals working with the device.
2.4 Flawlessness of the Device
Damaged equipment or worn-out parts can cause malfunctions or lead to
hard-to-detect hazards.
t Only operate the device when it is safe and in perfect working order.
t Observe the maintenance intervals (intervals and maintenance tasks, see
Chapter "8.2 Maintenance Schedule," page 54).
t Have any damage repaired immediately by Sartorius Service.
To Next Page
Loading...