Example: Setting the time, date and display brightness
Step Key (or instruction) Display
1. Switch off the balance. e
2. Switch the balance on; e
while all segments
are displayed: v briefly
--------
$ To move the cursor within r --------
ID number: repeatedly
$ To set or change ID: q
-3------
repeatedly
3. Confirm ID and activate w
H10.14.11
time setting.
4. Select 24-hour clock (“H") or
12-hour clock (“P"). q
H10.14.19
5. Toggle between hours, r H10.15.19
minutes and seconds.
6. Synchronize seconds with
a reference clock. q
H10.15.00
7. Confirm time and activate date. w 29.jan.011
8. Set date q repeatedly,
“Day", r
01.jan.01
“Month", and , q repeatedly,
r
22.apr.01
if desired, “Year". q repeatedly
Confirm date and activate
display brightness. w
22.apr.01
31
To Next Page
Loading...
Need help?
General
