EasyManuals Logo

Sartorius LE26P User Manual

Sartorius LE26P
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Balances with a Weighing Capacity over 10 kg:
Insert the right-angle plug into the jack and tighten
the screw.
Safety Precautions
Plug-in AC Adapter:
The AC adapter rated to Class 2 can be plugged
into any wall outlet without additional safety
precautions.
Benchtop AC Adapter 6971966:
The AC adapter rated to Class 1 can be plugged into
any wall outlet without additional safety precautions.
The ground terminal is connected to the balance
housing, which can be additionally grounded for
operation. The data interface is also electrically
connected to the balance housing (ground).
Note:
This equipment has been tested and found to
comply with the limits pursuant to part 15 of FCC
Rules. These limits are designed to provide reason-
able protection against harmful interference. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with these instructions, may cause
harmful interference to radio communications.
For information on the specific limits and class of
this equipment, please refer to the Declaration
of Conformity. Depending on the particular class,
you are either required or requested to correct the
interference.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sartorius LE26P and is the answer not in the manual?

Sartorius LE26P Specifications

General IconGeneral
BrandSartorius
ModelLE26P
CategoryScales
LanguageEnglish

Related product manuals