19
Operating Design
This chapter explains the operating
options available to you so that you can
familiarize yourself with the moisture
analyzer. There is only one key to a
function, i.e., the key retains this func-
tion throughout most of the menu levels.
The texts and symbols shown always
have the same meaning.
Keys
Some of the keys trigger different functions, depending on whether you press the key
briefly or press and hold the key:
– Press briefly = hold the key down for less than 1.2 seconds
– Press and hold = hold the key down for more than 1.2 seconds
– If you press and hold longer than 1.2 seconds, the function triggered is repeated every
0.6 seconds for as long as you hold the key.
Key Designation Press briefly Press and hold
e On/off key Switch device on or off* —
c CF key Analysis: cancel function —
Menu: cancel selection
Enter key Analysis: trigger the Menu: store the
selected function (e.g., selected setting and
Menu: store the tare) close the menu
selected setting
Down/Back Analysis: select a Menu: decrease
key function (e.g., tare) value 10-fold
Menu: decrease value or
return to previous selection
Up/Forward Analysis: select a Menu: increase
key function (e.g., tare) value 10-fold
Menu: increase value or
go to next selection
r Print key Send readout value —
or data record over
the interface port
* When you switch off the moisture analyzer, it remains in standby mode
To Next Page
Loading...
