35
Care and Maintenance
Service
Regular servicing by a Sartorius Service
technician will extend the service life of
your analyzer and ensure its continued
accuracy of measurement. Sartorius can
offer you service contracts, with your
choice of regular maintenance intervals
ranging from 1 month to 2 years.
The optimum length of the service inter-
val depends on the operating conditions
at the place of installation and on your
requirements.
Repairs
Repair work must be performed by
trained service technicians. Any attempt
by untrained persons to perform repairs
may result in considerable hazards for
the user.
Cleaning
! Make sure that no dust or liquid enters
the moisture analyzer housing
! Do not use any aggressive cleaning
agents (solvents, abrasive cleaning
agents, etc.); clean the moisture
analyzer using a piece of cloth which
has been wet with a mild detergent
(soap) only
§ Disconnecting the power supply:
unplug the power cord from the wall
outlet (mains supply); if you have
a cable connected to the interface,
unplug it from the moisture analyzer
$ The pan draft shield and the pan
support can be removed for cleaning
§ Carefully remove any sample
residue/spilled powder using a brush
or a handheld vacuum cleaner
§ After cleaning, wipe down the
analyzer with a soft, dry cloth
To Next Page
Loading...
