Purpose
With this function, you can enter, store
and load data records for initialization of
applications, including user-defined
data.
You can use this function in combination
with a program from Application 1 (such
as counting, weighing in percent), one
from Application 2 (checkweighing,
time-controlled functions) and an extra
function from Application 3
(identification codes, 2nd tare memory).
Features
– Store up to 300 data records
– Data records can be created, stored or
deleted individually
– Press the
ProDat soft key to display
data records
– Define a name for each data record of
up to 15 alphanumeric characters;
the desired location is displayed in the
product data memory
– Assign this function to soft key F4
or F5 to load product ID data without
activating the “ID” function
114
Product Data Memory
– Optional configuration in the Setup
menu to delete a single character when
entering a data record name by pressing
c. Device settings: Keys: CF func-
tion for input: Delete last character.
– Data records are displayed in
alphabetical order.
– Initialization data set for an application
(such as wRef, nRef) is saved when you
select the Store option. With several
applications and extra functions active,
you can select the desired parameters
before saving the data to define initial-
ization data.
– Use the numeric keypad to search for
and display individual data records
– You can assign this function to the
fourth or fifth soft key (from the right),
i.e. F4 or F5
– Error messages are displayed in the text
line in plain English – or your choice
of a different language.
– Press the
Delete soft key to delete a
data record
Battery-Backed Data Memory:
When the balance is disconnected from
AC power, balance-generated data
remains stored for approx. three
months. In the standby mode, the data
memory uses the power supply.
Factory Settings
No user-definable parameters.
Soft Key Functions
ProDat Toggle to data record display
Delete Delete selected data record
Load Overwrite the initialization
data with the selected data
record
Change Change the data in the stored
data record
New Create a new data record (after
entering a data record name)
and selecting an application, if
desired).
Store Store the initialization data of
the current application under
the selected data record name.
If data already exist for this
data record, a prompt asks
whether these data should be
overwritten.
No Answer “No” to cancel the ini-
tiated delete or overwrite
operation
Yes Answer “Yes” to perform the
delete or overwrite operation
Preparation
● Turn on the balance: press e
> The Sartorius logo is displayed
● Select Extra function (F4) or Extra function (F5) in the Setup menu: press s
● Select Application parameters: press the q soft key 2 x,
then the
O soft key once
● Select Extra function (F4) or Extra function (F5):
press the
q soft key 3 x (or 4 x), then the O soft key
● Select Product data memory
● Confirm Product data memory
See also “Application Parameters (Overview)” in the chapter entitled
“Configuring the Balance”
● Save settings and exit the Setup menu: press the oo soft key
To Next Page
Loading...
