Sartorius ME5-F - Toggle between Two Weight Units

Purpose
With this application, you can switch
the display of a weight value back and
forth between two weight units
by pressing a soft key.
You can use this application in
combination with any program chosen
from Application 2 (checkweighing,
time-controlled functions) and one from
Application 3 (totalizing, formulation,
statistics), as well as with the extra
functions.
Features
– Toggling the displayed weight
– Setting the display accuracy
– Other features as for the basic weighing
function
Factory Settings of the Parameters
ME215/235/254/414/415/614:
Weight unit 1:
Grams /g
ME5, ME2:
Weight unit 1:
Milligrams/mg
Display accuracy 1: All digits
Weight unit 2: Milligrams /mg
Display accuracy 2: All digits
* including the Signatories of the
Agreement on the European Economic
Area
59
Toggle between Two Weight Units, ( )
Preparation
Balances used as legal measuring instruments in the EU*: grams, carats and
milligrams are the only weight units available
Standard balances: All weight units listed below:
Display/ Line for
Unit Conversion factor Printout metrological data
Grams 1.00000000000 g g
Kilograms # 0.00100000000 kg kg
Carats 5.00000000000 ct ct
Pounds 0.00220462260 lb lb
Ounces 0.03527396200 oz oz
Troy ounces 0.03215074700 ozt ozt
Hong Kong taels 0.02671725000 tlh tlh
Singapore taels 0.02645544638 tls tls
Taiwanese taels 0.02666666000 tlt tlt
Grains 15,43235835000 GN GN
Pennyweights 0.64301493100 dwt dwt
Milligrams 1000.00000000000 mg mg
Parts per pound 1.12876677120 /lb lb
Chinese taels 0.02645547175 tlc tlc
Momme 0.26670000000 mom M
Austrian carats 5.00000000000 K K
Tola 0.08573333810 tol tol
Baht 0.06578947437 bat bat
Mesghal 0.21700000000 MS MS
● Select the Toggle Weight Units application in the Setup menu: press s
● Select
Application parameters: press the q soft key 2 x,
then the
O soft key once
●
Application 1 (basic settings): press the O soft key
● Select
Toggle wt. units: (repeatedly) press the Q or q soft key
● Confirm
Toggle wt. units: press the O soft key
Toggle wt. units Weight unit 1 see above
Display accuracy 1 ο All digits
Fewer for weight change
Last digit off*
Weight unit 2 see above
Display accuracy 2 ο All digits
Fewer for weight change
Last digit off*
ο = factory setting
* = not for verified balances used as legal measuring instruments
# = not on ME5, SE2
see also “Application Parameters (Overview)” in the chapter entitled
“Configuring the Balance”
● Save settings and exit the Setup menu: press the
oo soft key