1 About This Document
1.1 Scope
This operating manual applies to paint-mixing scale models:
− EVO1X
− LAB1X
1.2 Symbols Used
The term “device” used in these instructions always refers to
the combined unit of scale, AC adapter and ex-link converter.
1.2.1 Warnings
WARNING
Denotes a danger with risk that death or severe injury may
result if it is not avoided.
CAUTION
Denotes a danger with risk that moderate or minor injury may
result if it is not avoided.
NOTICE
Denotes a danger that can result in property damage if the
risk is not avoided.
1.2.2 Other Symbols
t
Required action: Describes actions which must be
carried out.
y
Result: Describes the result of the activities
carried out.
[ ] Text inside brackets refers to control and display
elements.
This symbol provides information for the sale of
scales verified for use in legal metrology.
In the following, the term “verified” is used to
mean “verified for use in legal metrology” or
“conformity-assessed.”
Figures on the Operating Display
The figures in these instructions are based on “standard”
scales. On verified scales, some displays and reports may
deviate slightly from the figures. Where this is significant
for operation, the differences will be explained in the text.
2 Safety
2.1 Intended Use
This scale is only intended for mixing colors and paints.
Appropriate containers must be used for loading each type
of material.
The scale can be operated via the display as a stand-alone
device or using application software (e.g., a paint-mixing
program from a paint manufacturer) installed on a connected
PC. The PC is connected to the ex-link converter via a USB
cable. Follow and observe the explosion protection
instructions in Chapter 2.2, page 4.
These instructions are part of the device. The device is
intended exclusively for use in accordance with these
instructions.
Contents
1 About This Document .............................3
1.1 Scope........................................3
1.2 Symbols Used .................................3
2 Safety ...........................................3
2.1 Intended Use..................................3
2.2 Explosion Protection ...........................4
2.3 Personnel Qualification.........................4
2.4 Significance of these Instructions ................5
2.5 Proper Working Order of the Device ..............5
2.6 Work on the Electrical Equipment of the Device ....5
2.7 Personal Protective Equipment ..................5
2.8 Safety Instructions Concerning Operation
of the Device .................................5
3 Installation.......................................5
3.1 Scope of Delivery ..............................5
3.2 Unpacking....................................5
3.3 Selecting a Setup Location ......................5
3.4 Installing the Scale ............................6
3.5 Connecting the Grounding Cable.................6
3.6 Establishing the Power Supply ...................7
3.7 Anti-theft Locking Device.......................8
3.8 Leveling......................................8
3.9 Warm-up Time ................................9
4 Cleaning and Maintenance.........................9
4.1 Cleaning .....................................9
4.2 Servicing .....................................9
5 Disposal..........................................9
5.1 Information on Decontamination ................9
6 Accessories......................................10
7 Serial Number Coding ............................10
8 Technical Data...................................11
8.1 General Data.................................11
8.2 Model-specific Data...........................12
8.3 Verified Models with EC Type Approval Certificate:
Model-specific Technical Data ..................12
9 EU Declaration of Conformity .....................12
EVO1X | LAB1X Installation Instructions 3
English
To Next Page
Loading...
