Sartorius PR 5210/10 - Analog Output (PR 5210;00 and PR 5210;10 Only)

PR 5210 Operating Manual PR 5210 Transmitter Series
Sartorius 15
2.5.4 Analog output (PR 5210/00 and PR 5210/10 only)
Connecting method:
4-pin plug-in terminal block
Number of outputs:
1 current output, output
voltage by use of external
resistor
Output:
Gross, net weight or via
profibus
Range:
0/4 ... 20mA, configurable via
setup
Resolution:
e.g. 0 - 20 mA in max. 40.000
parts
Linearity error:
@ 0 - 20mA: <0.05 %
@ 4 - 20 mA: 0.025 %
Temperature error:
< 100 ppm/K
Error on zero
< 0.05 %
Error on FSD:
< 0.1 %
Load:
0 ... 500 Ohm max.
Protected against short
circ.:
yes
Potential isolation:
yes
Cable length (screened):
150 m (current output)
0/4 ... 20mA
Analog signal,
current output.
The current is
supplied directly from
the terminals.
0 ... 10V
Analog signal,
voltage output.
The voltage level corresponds
to the voltage drop at the
500 Ohm (10 ppm/K) resistor.