Sartorius Sartocheck 3 plus - Installation; Delivery Scope and Goods Acceptance

12
5 Installation
5.1 Delivery Scope
5.2 Goods Acceptance
Incoming inspection:
– Check the shipment for damage!
– Check the shipment against the
delivery note to ensure that it is
complete!
Complaints
If the shipment was damaged
during transit:
– Immediately contact the carrier!
– Keep the packaging material (in
case the carrier wants to inspect it
or the shipment has to be returned
to us)
If the shipment is not complete:
– Immediately contact Sartorius
Stedim Biotech GmbH or the
Customer Service Department in
your country!
If the delivery has other defects:
– Immediately contact Sartorius
Stedim Biotech GmbH or the
Customer Service Department in
your country!
The following are included in
the delivery scope of the Sarto-
check
®
3 plus:
1. Filter integrity tester
Sartocheck
®
3 plus, item no. 16290
2. Operating instructions and
technical documents
3. Accessories (not shown in
the picture)
– Tubing “Inlet” with compressed
air filter (I.D. = 6 mm)
Order no.: 18104
– Tubing “Outlet”
(I.D. = 4 mm) Order no.: 18103
– Spare ink ribbon cartridge
Order no.: 6982141
– Spare roll of printer paper
Order no.: 6982142
– Country-specific power cord
Packaging for Return Shipment
Use the original packaging and
original packaging material as far
as possible.
If the original packaging and
original packaging material are
no longer available:
– Commission a packaging company
with specialized technicians.
– Pack the unit in a shipping
container in such a way that
mechanical damage is prevented.
If you have any questions about
packaging and transport securing
devices, please contact Sartorius
Stedim Biotech GmbH.
Check the equipment supplied
against the delivery note.
Please report incomplete deliveries
immediately to the shipping carrier
or the supplier.
Interim Storage
The external packaging of the unit
and its spare and replacement parts
is designed for a storage period of
three months from delivery.
Units kept in interim storage must
be stored in a closed, dry room at
temperatures from +5°C to max.
+50°C.
Fig. 5-1 | Sartocheck
®
3 plus
1 2