Sartorius Sartocheck 3 plus - Program Database Management; Uploading Test Programs from SD Card

32
7.13.2 Uploading in the Test Program from the SD Card (F2 - Program Database)
Save SD card archived test programs back into the Sartocheck
®
3 plus program data-
base. To do so, insert an SD card into the drive of the Sartocheck
®
3 plus and press
PAGE DOWN.
The data on the SD card are uploaded and displayed in a program selection list.
Here you can select the programs as described (see Fig. 7-27: Program databases:
Internal memory).
After you have selected the program or the program block, you will be prompted
to assign a memory location number and|or memory location to this program or
program block in Sartocheck
®
3 plus.
The test program and|or the test program section will be uploaded and saved
to the selected internal program memory location.
Fig. 7-30 | Program database:
Load test program
Fig. 7-31 | Test program:
Assign memory location number
Fig. 7-32 | Program database:
Program space
Fig. 7-29 | Program database:
Load test program