53
Reading in the test program from the SD card (F2) ... 32
Replacing the microfuses ..................... 46
Replacing the paper roll and the ink ribbon ........ 16
Safety ..................................... 9
Safety checks .............................. 10
Safety functions ............................ 18
Safety measures ............................ 10
Selectable languages .......................... 8
Self-check for transit and short-circuit ........... 18
Serial number .............................. 18
Service (F7 – main menu) ..................... 38
Service menu .............................. 46
Setup instructions ........................... 13
Skilled employees ........................... 10
Software configuration ....................... 39
Software update ............................ 18
Special functions (F6 – main menu) .............. 35
Switching off the device ...................... 22
Switching off the device on the failure
of the power supply ......................... 22
Switching on the device ...................... 19
Switching the device on and off ................ 21
Switch-off procedures ........................ 11
Table of contents ............................ 3
Technical data .............................. 7
Test conditions ............................. 22
Test execution ............................. 22
Test media ................................. 7
Test methods ............................ 8, 22
Test program from internal memory (F1) .......... 31
Test programs .............................. 17
Test selection .............................. 22
Tests .................................... 22
Trained person ............................. 10
Translation ................................. 2
Transport and unpacking ..................... 13
Troubleshooting ............................ 48
User abort ................................. 17
Users, managing ............................ 45
Visualization (F3 – main menu) ................. 35
Water intrusion test | Water flow test ............ 28
To Next Page
Loading...