Sartorius Sartocheck 4 plus - Connections with External Pressure Sensor

5.6 Connections with Sartocheck
®
4 plus can be operated with an external pressure sensor and with
External Pressure Sensor different ports for connecting tubing. The ports for connecting tubing, for both the
Sartocheck
®
4 plus and Sartocheck
®
4 MultiUnit, are illustrated in Fig. 5-11, Fig. 5-12
and Fig. 5-13.
Check to make sure that all inlet and outlet pressure tubing is connected properly,
that all electrical connections have been correctly installed, and that the paper roll
as well as the ribbon cartridge have been inserted.
Fig. 5-11 | Connection with external pressure sensor and manual valves
Fig. 5-12 | Connection with external pressure sensor and external valves
Sartocheck 4 plus
Sartocheck 4 plus
20 Installation