Sartorius Sartocheck 4 plus - Switching the Unit ON and OFF

28 Operation
7.2 Switching the Unit If you want to switch the unit on, proceed as follows:
ON and OFF
Before you switch on the power supply and the compressed air, compare the
connection data for the unit (see the Chapter 01 Technical Specifications) with
the data for the mains current and the compressed air supply.
Connect Sartocheck
®
4 plus Filter tester to the mains supply by plugging the power
cord into the wall outlet, install all tubing connections. The unit is now ready for
operation.
Login menu
User ID: Enter operator’s name
Password: Enter operator’s password
OK: Confirm correct entry
Cancel: Delete entry
Important Note: When Sartocheck
®
4 plus Filter tester is delivered it is factory
set for the following user:
Name: mentor
Password: mentor
Operators must log-in before activating the Main Menu.
The operator logs in by pressing the “Login” key on the keypad. After pressing the
“Login” key, the user will be asked for their name and password. When both are
entered correctly, the keypad and touch screen are released for use. When the opera-
tor stops working with Sartocheck
®
4 plus Filter tester, they must always log out by
pressing the “Logout” key. Sartocheck
®
4 plus Filter tester is then blocked for further
operation until another operator logs in.
Information line with model, version, system number and user name.
Menu display: Main Menu
F1-F8: Select the function menus with the function keys
Selects the function menus
Functional unit selected and operational status.
The Main Menu appears.
t Before starting a test, allow the unit to warm up for about 20–30 min.
For shut-down times < 30 min and constant ambient temperatures, the warm-up
phase can be shortened accordingly. For more information about the tests, see
Chapter 7.3 ff.
t Program the data for the test routine.
t The Sartocheck
®
4 plus Filter tester ready for operation (by the logged-in user).
t Start the test.
Only service technicians or trained personal may install connections and start up
the unit!
Fig. 7-3 | Login menu
Fig. 7-4 | Main Menu