Sartorius Sartocheck 4 plus - Saving Backup to SD Card (F4)

Operation 45
7.15.3 Saving Backup to SD Card (F4) With the backup function, all test programs in the internal memory will be written
on an SD Card (F3) and|or the test programs in the internal memory will be rewritten
(F4). Insert the SD Card into the SD card reader and then press PAGE DOWN.
Only use the backup function for saving data, not for archiving data.
The backup files can only be viewed with Sartocheck
®
4 plus because file compression
is specific to Sartocheck
®
4 plus. For archiving your program files, we recommend you
use the (F1) function “Test programs from internal memory” -> (F3) “Save on
an SD card.”
You have to individually name your backup files.
Type in the backup file name and confirm by pressing enter.
Then all data in the program database will be written to the backup file.
If the backup SD card already contains a backup file, you must confirm that
the data will be overwritten before saving or cancel the backup routine.
Saving the backup to the network (F5) follows the same procedure as from an
SD card (F4).
Fig. 7-39 | Program database: Save backup
Fig. 7-40 | Program database: Save backup
Fig. 7-41 | Program database: Save backup