Operation 47
7.15.5 Deleting PLC Programs (F8) This function will delete programs in memory locations PLC 1 and PLC 2 from
the selected test unit.
7.16 Visualize (F3 – Main Menu) This function will display the test status of any currently active test unit.
Only active test units will be selectable. Direct access to this screen is also possible
by using the status buttons at the bottom of all screens.
7.17 Results Database The results database is structured analogously to the program database.
(F5 – Main Menu) This is where all test results are saved. The functions of the results database
are similar to those of the program database.
F1: Test results from internal memory
This will display all test results inside the Sartocheck
®
4 plus Filter tester
F2: Write test results from SD Card to memory
This enables the results to be uploaded to the internal memory of the
Sartocheck
®
4 plus Filter tester
F3: Upload test results from network
Displays all results on the network in the corresponding directory
F4: Save all test results to SD card
Saves all test results in the Sartocheck
®
4 plus Filter tester on an SD card
F5: Save all test results to network
Saves all test results on the network in the corresponding FTP directory
F6: Manage audit trail
Manages the audit trail and defines which events are traced
Fig. 7-45 | PLC program deletion
Fig. 7-46 | Visualize
Fig. 7-47 | Results database
To Next Page
Loading...
