Sartorius Sartocheck 4 plus - Hardware Configuration (F1-Service); Network settings

54 Operation
7.19.1 Hardware Configuration F1: External reference volume
(F1-Service) F2: Network settings
F3: Test unit address allocation
F5: PLC interface test
7.19.1.1 External reference volume In the hardware configuration, the volume for the external reference tank for each
test unit is set separately.
The external reference tank function is only valid for the Filter tester.
7.19.1.2 Network settings
Fig. 7-62 | Service Menu: Hardware configuration
Fig. 7-63 | Service Menu: Hardware configuration
Fig. 7-64 | Network setting