10
Getting Started
User Manual Secura
®
, Quintix
®
, Practum
®
4.2 Installing the Balance
Balance with Draft Shield
t Install the following parts in the order listed:
– In-use dust cover
– Turn the draft shield lock to “unlocked” .
– Put the draft shield (1) on the balance.
Note:
Use both hands to hold the top struts of the draft shield.
Move the side doors right to the back.
– Turn the draft shield lock to “locked” .
– Put the shield plate (2), shield disk (3), pan support (4), weighing pan (5) and pan
draft shield* (6) on the balance.
Note:
For information about how to clean the draft shield, see the Care and
Maintenance chapter.
* = for models with readability of 0.1 mg only
Secura
®
Models:
Quintix
®
and Practum
®
Models:
5
4
2
1
To Next Page
Loading...
