Sartorius Secura 224-1S - Ambient conditions, Application, Stability signal, Zero;Tare

33
System Settings (Setup Menu)
User Manual Secura
®
, Quintix
®
, Practum
®
Under Ambient conditions:
t Choose whether the conditions at the balance location are Stable or Unstable.
If Unstable is selected, adverse ambient conditions (drafts, vibrations) are filtered
by changing the measurement time for the weight values.
Under
Application:
t Choose whether the balance will be used for Weighing or Dosing.
This setting is used to compensate for load fluctuations on the display.
–
Weighing: The display responds very quickly to fast load changes. The display
responds more slowly to small changes in weight (in the digit range). This
setting is suitable for normal weighing.
– Dosing: The display responds quickly to small changes in weight, making
it faster and more accurate for additional dosing and container filling
functions.
Under
Stability signal:
t Choose whether stability is shown with High accuracy, Medium accuracy or
Fast on the display.
The balance stability is displayed as soon as the weighing result is constant within
a defined range. Until stability is reached, the measured value is shown in gray on
the display and only turns black once the balance is deemed stable.
Under Zero/Tare:
t Define settings for zeroing and taring.
– Zero/Tare function: Choose whether the balance is zeroed and tared
With stability or Without stability. If Without stability is selected, the
balance is automatically tared when A or D is selected.
If With stability is selected, the balance is tared the next time stability is
reached after A or D is selected.
– Automatic zero (zero tracking function): If this option is enabled, changes
of a set fraction of scale intervals per second starting from the display zero
point are automatically zeroed.
–
Zero/Tare at power on: If this option is enabled, the balance is
automatically zeroed or tared when switched on.