Sartorius Secura 224-1S - Identifier (Secura only)

35
System Settings (Setup Menu)
User Manual Secura
®
, Quintix
®
, Practum
®
6.2.7 Identifier (Secura
®
only)
Identifier
Set device ID
Set additional ID
Batch ID function
Sample ID function
Define identifiers for the printout via the g button and in the ISO/GLP printout here.
Under Printout in Manual print, the ISO/GLP printout option must be activated. IDs
can be a maximum 14 characters long.
Set device ID menu option:
The device identification (ID) is printed in the header of the GLP printout.
t To activate the device ID, select t, enter the desired device ID, and confirm
withl.
Set Additional ID menu option:
The additional ID (A ID) is also printed in the header of the GLP printout.
t To activate the additional ID, select t, enter the desired device ID and confirm
with l.
Batch ID function menu option:
The batch ID (LID) is queried one time at the start of the GLP printout.
t Activate this option to enter or print out the batch ID.
Sample ID function menu option:
The sample ID (SID) can be activated for each printout by selecting the g button on
the balance display.
t Define settings for printing the sample ID.
– On: The sample ID is activated. This ID is queried before each printout.
– Autom. increment: Select this option to automatically assign the sample ID
in ascending order.
– Autom. decrement: Select this option to automatically assign the sample ID
in descending order.
– Off: The sample ID is deactivated.
To enter and delete figures and text, e.g., for the sample ID, see “Enter Figures on the
Keypad” on page 25.