Sartorius SIWRDCP - Application Program Settings: Classification and Net-total; Classification Settings; Net-total Formulation Settings

Appl
Appl 2**
class.
Classification
3.6. Minimum load for initialization and defining the class 1 lower limit
3.6.1* 1 digit
3.6.2 2 digits
3.6.3 5 digits
3.6.4 10 digits
3.6.5 20 digits
3.6.6 50 digits
3.6.7 100 digits
3.6.8 200 digits
3.6.9 500 digits
3.6.10 1000 digits
4.3. Activate control line for “Set” as:
4.3.1* “Set” output
4.3.2 Ready to operate (for process control systems)
4.7. Activation of outputs
4.7.1 Off
4.7.2 Always active
4.7.3* Active at stability
4.8. Number of classes
4.8.1* 3 classes
4.8.2 5 classes
4.9. Parameter input
4.9.1* Weight values
4.9.2 Percentage
4.10. Automatic printing
4.10.1* Off
4.10.2 On
Appl 3**
net tot Net-total Formulation (Second Tare Memory)
3.6. Minimum load for automatically saving/transferring values
Numeric menu as for Counting
3.17. Printout when value is saved in totalizing memory
3.17.1 Automatic printout of results off
3.17.2* Generate printout with complete standard configuration each time O is pressed
3.17.3 Generate printout with complete standard configuration only once when O is pressed
totaliz Totalizing
3.6. Minimum load for automatically saving/transferring values
Numeric menu as for Counting
3.16. Values saved automatically
3.16.1* Off
3.16.2 On
3.17. Printout when value is saved in totalizing memory
3.17.1 Automatic printout of results off
3.17.2* Individual of transaction by pressing O
3.17.3 Print components of transaction by pressing O
3.22. Source of data for values saved automatically
3.22.1* Application 1
3.22.2 Application 2
3.23. Value(s) to be saved
3.23.1* Net
3.23.2 Calculated
3.23.3 Net and calculated
oFF Disabled
* Factory setting ** Menu level used in Signum 3 only
Configuration
22