10 Weigh Cell Operating Instructions
Device Description
3.1.2 Electronics Unit
1
2
3
4
7
5
6
Fig. 4: Electronics unit
Pos. Name Description
1 Electronics Unit
2 DC jack
3 Female connector, weigh cell
4 USB-C connection — Is screw-on.
— For the YRD01 display unit
5 Indicator light TxD and RxD Flashes yellow during data transfer.
6 Power indicator light — Illuminates in green when there is a power supply.
— Illuminates in red if there is no weighing system.
7 RS232 interface
3.2 System Description
The products are made up of two parts:
— Compact weigh cell, which can be secured on a level surface.
— Electronics unit
With the integrated adjustment weight, all NC-type models can be adjusted at any time on command or by pressing a
button when using the optional YRD01 display unit or using the CAS Suite software.
To Next Page
Loading...
