. Personal Safety
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
WARNING! Dust forms when grinding which can cause injuries if
inhaled. Use an approved breathing mask. Always provide for good
ventilation while machine is in use.
Always wear approved PPE:
Protective helmet Hearing protection
Dust Mask Protective goggles
Non-slip boots with steel toe Protective gloves
WARNING
Under no circumstances may the machine be started without observing the
safety instructions.
Should the user fail to comply with these suggestions, SASE Company Inc. or its
representatives are free from all liability both directly and indirectly.
Read through these instructions and make sure that you understand the contents
before starting to use the machine.
Should you, after reading the safety instructions, still feel uncertain about the
safety risks involved you must not use the machine, please contact your SASE
representative for more information.
Reminder
Always check electrical source before starting.
Only qualified personnel should be allowed to operate machinery.
Never use a machine that is faulty. Carry out the checks, maintenance
and service instructions described in this manual. All repairs not
covered in this manual must be performed by a repairer nominated by
either the manufacturer or distributor.
Always wear personal safety equipment such as sturdy non-slip boots,
ear protection, dust mask and approved eye protection.
Machinery should only be started when grinding heads are resting on
the ground.
The machine should not be started without the dust skirt attached. It
is essential a good seal between floor and machine be established for
safety, especially when operating in dry grinding applications.
When changing the grinding discs ensure the unit is OFF. Press the
Stop button and when the machine is completely stopped, press the
emergency stop button. Disconnect the power cord, to add
protection.
The machine should not be lifted by handles, motor, chassis or other
parts. Transportation of the machine is best done on a pallet / skid to
which the machine must be firmly secured.
Extreme caution must be used when moving machinery by hand on an
inclined plane. Even the slightest slope can cause forces/ momentum
making the machinery impossible to brake manually.
Never use the machine if you are tired, if you have consumed any
alcohol, or if you are taking medication that could affect your vision,
your judgment or your coordination.
Never use a machine that has been modified in any way from its
original specification.
Be on your guard for electrical shocks. Avoid having body contact with
lightning conductors/metal in the ground.
To Next Page
Loading...
