THERMOSTAT OPERATION
1. Setting the thermostat
This thermostat is very easy to operate. Set the SYSTEM switch
to either HEAT or COOL, then press the ▲ or ▼ buttons until the
temperature you want to maintain is shown on the right side of the
display. If you want to turn the system off, just move the SYSTEM
switch to the OFF position and the FAN switch to the AUTO position.
2. Set current day and time
Press the TIME button. The hours display will begin to blink.
Press the ▲ or ▼ buttons until you reach the correct hour and AM/PM
designation. (AM begins at mid-night, and PM begins at noon).
Press the TIME button again. The minutes display will begin to blink.
Press the ▲ or ▼ buttons until you reach the correct minutes.
Press the TIME button again. The day of the week will begin to blink.
To Next Page
Loading...
