Saswell T21STK-2 - Manual Operation; Hold Temperature Function; Temperature Override

27
MANUAL OPERATION
1) Hold Temperature
With the SYSTEM switch set to HEAT or COOL, momentarily press the HOLD button.
HOLD will be displayed. Use the ▲ or ▼ buttons to adjust the temperature. The
thermostat will control the room temperature at the selected setting until you press the
RUN button to restart the program operation.
2) Temperature Override (When in the program RUN mode).
Press the ▲ or ▼ buttons to select the desired room temperature. The thermostat will
override the current programming and keep the Room temperature at the selected
temperature until the next program period begins. The thermostat will then revert back to
the program temperatures.