Check your programming
Follow these steps to check your thermostat programming one final time
before beginning thermostat operation:
1) Move the SYSTEM switch to HEAT.
2) Press PRGM to view the 1
st
weekday heating period time and temperature.
Each time you press PRGM the next heating period time and temperature
will be displayed in sequence for weekday, then Saturday and Sunday
program periods (you may change any time or temperature during this
procedure).
3) Press RUN.
4) Move the SYSTEM switch to COOL.
5) Repeat step 2 to check the cooling program.
To Next Page
Loading...
