Satec PM130 PLUS Series - Local Time Settings

Chapter 5 Configuring the PM130 PLUS General Meter Setup
PM130 PLUS Powermeter Series_Installation Operation and Manual 103
5.2.9 Local Time Settings
This setup allows you to specify your time zone, daylight saving time, and clock synchronization options.
Using the Front Display
Select rtc from the main menu. See Viewing and Changing Setup Options in Chapter 3 for information on
configuring parameters via the front display.
Using PAS
Select General Setup from the Meter Setup menu, and then click on the Local Settings tab.
Figure 5-13: General Setup Dialog Box – Local Settings Tab
The available options are described in Table 29.