Chapter 5 Configuring the PM130 PLUS Configuring Recorders
PM130 PLUS Powermeter Series_Installation Operation and Manual 112
5.5.2 Configuring the Event Recorder
To configure the Event log file:
1. Double click on the Event Log file partition with the left mouse button.
2. Select a desired file type for your file.
3. Select the maximum number of records you want to be recorded in the file.
4. Click OK, then send your new setup to the meter or save to the device database.
By default, the Event recorder stores all events related to configuration changes, resets, and device
diagnostics.
5.5.3 Configuring the Data Recorder
Conventional Data Log Files
The Data recorder is programmable for recording up to 9 data parameters per record in each of the
conventional data log files. The list of parameters to be recorded to a data log is configurable individually
for each file.
To create a new data log file or re-configure an existing file:
1. Double click on the file partition with the left mouse button.
2. Select a partition type for your file.
3. Select the number of parameters you want to be recorded in the file records.
4. Select the maximum number of records you want to be recorded in the file.
5. Click OK, and then send your new setup to the meter, or save to the device database.
To Next Page
Loading...
